As originally asked by Joe Braido.

If anyone can reference a good contract manufacturer to pouch and final pack simple devices in a quick turn around, please contact me.

James Wisser
President at Pinehurst Plastics
Robling Medical – Brent Robling is the presient.
roblingmedical.com

Rocky Reed
Quality Assurance Senior Technician at Zimmer Biomet
C&A Tool, in Churubusco, IN is a contract manufacturer of medical devices and can perform this service. www.catool.com

Joe Braido
Vice President, Global Regulatory Affairs and Compliance at Hill-Rom
I appreciate everyone’s reply to date. Fortunately, I was able to negotiate with the existing manufacturer to conduct a few more runs to get us through a few more months. I will make note of all respondents and may call you in the near future based on some new client requests or as I locate another manufacturer for my existing client. Thank you.

Gregory Martin, Ph.D.
Medical Device Executive and Entrepreneur
I have used Phase II in the past when I was at Hologic and Hemedex. I have been quite happy with them and their ability to work with small companies.

Ron Lancaster
Director, Corporate Research at Boston Scientific
STD Med in Stoughton MA 781.828.4400 – ask for me. Med device clean room assembly and packaging is all we do. We are 100% FDA/CE compliant, have redundant clean rooms and full power generation for disaster recovery. We are fast and very cost effective.

Sean Darling
Controller
Try CFI Medical. Www.cfimedical.com.

We tyvek pouch in our ISO 13485, FDA registered plants in USA and ASIA. We also have a talented engineering and manufacturing group and do many design and build jobs for creative entrepreneurs!

Donald Rochelo
COO/CHAIRMAN at Apex Resource Technologies
Joe,

I’m Don Rochelo, COO of Apex Resource Technologies, Inc. in Pittsfield, MA. Our web site is apexreourcetech.com. We do packaging as well. Our business is medical and the making of implantable products and related support devises like instruments that delivery the implanted products into the body. You will notice some packaged items on our web site. Thanks, Don

Bill Becker
President at AutoMotion Technologies
Are you still looking or has the need been filled now?

Charles Scalies
President at Source4Quality, Inc.. Owner QECUS
Here’s another idea that may/may not work for you. Since you describe them as “simple” devices you may want to consider using sheltered workshops.If it’s truly simple, these organizations can do a great job for you. There are sheltered workshops all around the country. Just a thought.

Rich Timmons
Creative Director at Marketing Services Collaborative
Try Mangar Medical Device Packaging. 97 Britain Dr New Britain, PA 18901
(215) 230-0300

Let them know Rich Timmons referred you, please. Good Luck.

Kevin Ridsdale
Sr. Global Quality professional with automotive background is CURRENTLY SEEKING A SR QUALITY POSITION with Travel
InPro Enterprises in Wayne, Michigan is a non-profit manufacturing company it has a strong background doing piece work and light assembly in the medical, LED lighting, and automotive fields.
The shop rate is below $7.00/ hour. The director Kevin Ridsdale is a former Global Supplier Quality Manager from Pall Corp and former Group Manger from General Motors.
This is a company worth checking out
Ph 734-578-3373

Alan Liwush
Engineer at KAL Manufacturing – Co-Founder at Go Golf U.S.
[http://kal-mfg.com/|leo://plh/http%3A*3*3kal-mfg%2Ecom*3/CzrT?_t=tracking_disc]

Doug Molland
Senior Engineering Technician at Heraeus Medical Components (formerly Biotectix, LLC)
Evergreen Medical Technologies

Zwan Impex
Sales & Marketing at Zwan Impex
If you looking from Pakistan ( Sialkot) please write us an email at mughal@zwanimpex.com

Bill Alexander
Manufacturers Representative at Alexander Sales Group
Fast Forward Medical – Minneapolis MN 612.501.0415

Meghan M. Alonso
Global Business Development, Sales, and Commercial Strategy for Medical Devices, Diagnostics, and Life Sciences
do you need the products manufactured then packed or just packed? I have a few connections here in So. Cal as well as in Mexico that are all within ISO standards that we send our clients to. Give me a call at 760-687-4030 ext. 3. If you need any help with development for transfer to manufacturing my company can also help with that….Symbient Product Development.

Scott Herbert
Founder- President at Rapidwerks Inc.
I’ve used Peridot before good group easy to work with.

Patrick Pickerell
President, Peridot Corporation
Peridot is well set up for this and can help. We are ISO-13485 certified and have both tray and pouch sealing capability.
www.peridotcorp.com

Doug Biette
Technology Development & Technical Operations Executive
Quality Tech Services (QTS) ([http://www.qtspackage.com/|leo://plh/http%3A*3*3www%2Eqtspackage%2Ecom*3/ei3k?_t=tracking_disc]) in Bloomington MN will bend over backwards to get your product to market. They work hard to understand your needs and they know the regulations. From this they give you great solutions that meet your launch targets. Doug Wilder (CEO) will be involved in your project, make sure resources are applied and a cost suitable solution is put in place. I recommend them without any reservation.

Corey P. Sinclair
Global Logistics Executive
We may be able to help you at Irvine…give me a call and let me know what you need, sounds like a quick and easy.