As originally asked by Mark Cobbold.

Daniel Subotich
Director
My separation system is hollow fiber based and can separate cells or microparticles. It is the only one able to process volumes as low as 1ml. Upper limits are open.

Frédéric Boonen
Creative Consultant
Mark, we have division to engineer cell separation devices. Including prototyping of metal, plastics and electronics. mail us at [email protected]
Thanks,
Frederic Boonen
[http://www.boonendesignstudio.be/site/page.php?id=44|leo://plh/http%3A*3*3www%2Eboonendesignstudio%2Ebe*3site*3page%2Ephp%3Fid%3D44/IRXf?_t=tracking_disc]

Marty Fitzgerald
Experienced Sales & Marketing Strategist For Life Science Marketing & Medical Device Design
Mark,

We specialize in cell separation instruments. Please see the link below for a case study on cell separation.

[http://www.formamedicaldevicedesign.com/case-studies/advanced-liquid-logic-2/|leo://plh/http%3A*3*3www%2Eformamedicaldevicedesign%2Ecom*3case-studies*3advanced-liquid-logic-2*3/qSnJ?_t=tracking_disc]

Jennifer Palinchik
President at JALEX Medical
Mark,

Our product development firm is currently working on this type of project and we have connections with an East Coast GLP testing facility for verification and validation testing. We also assist in the regulatory submissions. Please let me know if you would like to discuss this opportunity further.

Jerry Twomey
Electronics – Medical Devices, Analog, Mixed Signal, RF
Mark – Not sure what your needs are, but I have done the electronics for a multitude of medical devices. Due to all the regulatory issues its very different than consumer and commercial product development. Let me know if I can be of help.
Jerry Twomey
Effective Electrons

Maureen Mende
Regulatory Consultant
JDID in Sacramento, CA. does early industrial design work on a contract basis. Jubal DeLong is the CEO. You can check them out at jdidProductDesign.com. Once you are ready for the regulatory strategy, analytical and clinical validation as well as FDA submissions check out Myraqa Inc. at Myraqa.com.

Meghan M. Alonso
Global Business Development, Sales, and Commercial Strategy for Medical Devices, Diagnostics, and Life Sciences
Hey Mark, we would be happy to take a look for you and see if we are a good fit. If not, I have some partners that may be. I work at Symbient Product Development and can be reached at 760-687-4030 ext. 3.

Jack Matthews
President, TG Labs
Hello Mark, I hope you do not find this self serving, but I would recommend our company, TG Labs. We are located in Denver. Colorado but service around the world with engineering, project management, and regulatory work to support new medical and chemical ideas getting to market. We utilize a special process called SEIT to make sure what we deliver, meets your’s and your customer’s needs. We would enjoy chatting with you to find ways to save costs and deliver excellent results with our SEIT (Systems Engineering, Integration and Test) approach. If you will send an email to [email protected]. We will look at possibilities for assisting.

Tony Gabriele
Director, Strategic Accounts at Viant
Hi Mark,

What type of partnering did you have in mind?

Mark Cobbold
Associate Member at Broad Institute of MIT and Harvard
Thank you for all of your suggestions. I will reply privately to each of you.
This is very helpful.

Daria Hammond
CEO of Always There Medical Care, LLC
I will take a look at the website then forward the information along. Thanks

Eugene Canavan
Medical Design Director at Design Partners
I work for a medical product development company, we provide Design, Engineering and Human factors integration. checkout www.designpartners.com .Is this the kind of help you are looking for???

Neil Parbrook
Clinical Applications Engineer (Fertility) at Merck Group
Hi Mark,

Could you key me know some more details of the application?

Many thanks
Neil

Wm. Scott Morris
Medical Devices Professional- Business Owner Lawn, Landscape, Brick Paver and fence Service, installation and maintenance.
Try bringing your ideas to CMSI, let’s see what we can do. Cmfgsolutions.com

Bob Light
Director, Financial Systems at VBrick Systems, Inc.
Hi Mark,

I would suggest that you provide a bit more detail about what you are looking for the partner to provide. Is it capital, engineering services (either design or mfg), etc.

That would give people a direction for recommendations or referrals.